Standard operating procedure of laser cutting machine

The laser cutting machine is an important equipment for sheet metal processing. The correct use of the laser cutting machine is also an important prerequisite for improving its service life. Therefore, after purchasing the machine, we must master the standard and standardized machine operation procedures and methods to reduce the failure rate. , To improve the service life, below we will introduce the standard and standardized operation process of the laser cutting machine

First of all, we must strictly follow the regulations, follow the principles of power-on and power-off, and do not force it to close or open;
Secondly, employees are not allowed to operate the machine without training, and can only operate on the machine after complete training;
Third, during the working process of the laser cutting machine, outsiders are not allowed to approach the operating table and console, and the core operations must be completed by professional personnel;
Fourth, adjust the light path of the machine tool, adjust the cutting head under the follow-up method, and force to follow the accurate control process to ensure the safety of man and machine.
Fifth, every time you turn on the machine, you need to return to the reference point, check and process the focus lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1Mpa.
Sixth, check the external light path protection gas, freezer, cooling river, air compressor, refrigeration dryer, and drainage filter once a week.