After purchasing a laser cutting machine, if it is properly maintained, the service life of the laser cutting machine will be prolonged
Several major use skills of fiber laser cutting machine
1. The protective lens in the laser head of the laser cutting machine is checked once a day. When the collimator lens or focusing lens needs to be disassembled, record the disassembly
process, pay special attention to the installation direction of the lens, and do not install the wrong lens;
2. Before turning on the power supply of the water chiller, check the water level of the water chiller. It is strictly forbidden to turn on the water chiller when there is no water or
the water level is too low to avoid damage to the water cooling equipment. It is strictly forbidden to squeeze and step on the water inlet and outlet pipes of the water cooler to keep
the waterway unblocked;
3. The operator of the laser cutting machine or the person approaching the laser during laser use should wear appropriate laser protective glasses and protective clothing. In the area
wearing protective glasses, there must be good indoor lighting to ensure The operator operates smoothly;
4. When using gas cylinders, avoid crushing electric wires, water pipes and air pipes to avoid electric leakage, water leakage and air leakage. The use and transportation of gas cylinders
should comply with gas cylinder supervision regulations. It is forbidden to explode the gas cylinder in the sun or close to a heat source. When opening the bottle valve, the operator must
stand on the side of the bottle mouth;
5. Routine maintenance must be carried out, regular statistics on the use of the machine, and regular records of each part of the fiber laser cutting machine. If the effect is not good, replace it in time to prevent problems before they occur; such as when parked for a long time, sometimes Please apply butter on the moving parts of the machine and wrap them with anti-embroidery paper. For other parts, check whether there is rust regularly, and perform rust removal and anti-rust treatment on the rusty parts. (If possible, add a dust cover. ), and the machine tool should be cleaned and inspected regularly.
Post time: Jun-26-2021